Okidata Troubleshooting Guides

Okidata OL Series Printer Codes/Messages
ERROR OPTION RAM CHECK Option RAM error.
ERROR ENGINE FUSING PROBLEM Fusing temperature is higher or lower then the reqiured value.
TONERLOW Toner is running out.
TONERSNS A fault occured with the toner sensor.
CHG DRUM Replace image drum.
MEMORY OVERFLOW The page buffer is overflowing because it received too much data.
TRAYn #REQUESTED The paper in tray n is not the size specified.
MANUAL #REQUEST Request for manual feed.
TRAYn PAPEROUT No paper in tray n
PAGE BUFF OVERFLOW The page buffer overflowed
PRINT OVERRUN The print data is too complicated to be printed.
HOST I/F ERROR An error occurred in the serial interface.
TRAYn SIZE ERRn Wrong size paper was fed from tray n.
TRAYn Input Jam
TRAYn Feed JAMn After feeding paper from tray n, a jam occured.
PAPER Exit JAMn A jammed occured during paper ejecting.
COVER OPEN The upper cover was opened.
CARD FORMAT Card Check found an error.

 

Controller Errors
ERROR 10 An error was detected by the program ROM check.
ERROR 20 An error was detected by the font ROM check.
ERROR 30 An error was detected by the resident RAM check.
ERROR 40 An error was detected by the EEPROM check.
ERROR 50 An font card error was detected.
ERROR 60 An otional RAM board error was detected.
ERROR 70 A fault occured with the fan motor.
ERROR 71 A fault occured with the fusing unit.
ERROR 72 A fault occured with the thermistor in the fuser (open check error).
ERROR 73 A fault occured with the thermistor in the fuser (short check error).
ERROR 80 Interface time-out occured between the main controller board and the operator panel.
ERROR 81 Interface time-out between the main controller and the optional tray.
ERROR 90 A watchdog timer time-out occured.
ERROR F0 Firmware Program Error.